Earlier than you employ, learn security precautions fastidiously, and use this product correctly. The precautions described on this handbook comprise vital contents associated with security; due to this fact, please observe the directions accordingly. The precautions are composed of DANGER, WARNING and CAUTION.

DANGER

There’s a hazard of occurring electrical shock within the enter/output terminals so please by no means let your physique or conductive substance is touched.

WARNING

1. This product doesn’t comprise an electrical swap or fuse, so the person wants toinstall a separate electrical change or fuse externally. (Fuse ranking: 250V zero.5A)
2. To forestall defection or malfunction of this product, provide correct energy voltagein accordance with the score.
3. To stop electrical shock or malfunction of product, don’t provide the poweruntil the wiring is accomplished.
4. Since this product just isn’t designed with explosion-protective construction, do notuse it anywhere with flammable or explosive gasoline.
5. Don’t decompose, modify, revise or restore this product. This can be a causeof malfunction, electrical shock or hearth.
6. Reassemble this product whereas the facility is OFF. In any other case, it could be a causeof malfunction or electrical shock.
7. In case you use the product with strategies apart from specified by the producer,there could also be bodily accidents or property damages.
8. As a result of hazard of electrical shock, use this product put in onto a panel whilean electrical present is utilized.

CAUTION

1. The contents of this handbook could also be modified with out prior notification.
2. Earlier than utilizing the product you bought, guarantee that it’s precisely what youordered.
3. Ensure that there isn’t a injury or abnormality of the product duringdelivery.
4. Don’t use this product at anywhere with corrosive (particularly noxious gasoline orammonia) or flammable gasoline.
5. Don’t use this product at anyplace with direct vibration or impression.
6. Don’t use this product at anyplace with liquid, oil, medical substances, mud,salt or iron contents. (Use at Air pollution degree 1 or 2)
7. Don’t polish this product with substances corresponding to alcohol or benzene.
8. Don’t use this product at anyplace with a big inductive issue or occurringstatic electrical energy or magnetic noise.
9. Don’t use this product at anyplace with potential thermal accumulation due todirect daylight or warmth radiation.
10. Set up this product at place beneath 2,000m in altitude.
11. When the product will get moist, the inspection is crucial as a result of there’s adanger of electrical leakage or fireplace.
12. If there’s extreme noise from the ability provide, utilizing insulating transformeror noise filter is really helpful. The noise filter have to be hooked up to a panel which is already related to a floor and the wire between the filter output and energy provide terminal should be as brief as potential.

13.If puttig energy cables carefully collectively then It’s efficient towards noise.

14.Don’t join something to the unused terminals.

15.After checking the polarity of terminal, join wires on the right place.

16.When this product is related to a panel, use a circuit breaker or swap permitted with IEC947-1 or IEC947-Three.

17.Set up the circuit breaker or swap at close to place for handy use.

18.Write down on a label that if the circuit breaker or change is working then the facility shall be disconnected for the reason that circuit breaker or swap is put in.

19.For the continual and secure use of this product, the periodical upkeep is beneficial.

20.Some components of this product have restricted life span, and others are modified by their utilization.

21.The guarantee interval for this product together with components is one 12 months if this product is correctly used.

Names and features of respective components

Number of operation mode

Please choose operation mode by turning of operation mode change in entrance of panel. Consumer can choose 6 forms of operation modes Operation mode is displayed as like A, B. C. D. E. F or A1, B1, C1, D1, E1, F1.

Number of Time unit

Please choose time by turning of Time vary change

Use can choose 16 varieties of time ranges and it’s displayed as like sec, min, hrs, 10h

Specs

M o d e			MA4N-A	MA4N-B		MA4N-C
Provide voltage			24 –	240 V a.c/d.c 50 –		60 Hz
Voltage regulation			1	zero% from provide vo		ltage
Energy consumption			four.four V A (	240 V a.c), 2.1 W		(240 V d.c)
Resetting time				Max. zero.1 sec
MinSignal size	START Enter		Min.	20ms
	INHIBIT Enter
	RESET Enter
Enter situation	START Enter		Non voltage enter Impedance in a shor Residual voltage Max. zero.7 V d.c Impedance in op	t circui t: Max. 2 MΩ in a brief circuit: en: Min. 100 MΩ
	INHIBIT Enter
	RESET Enter
Output			Time Restrict contact 2c	Time Restrict contact 1c Instautaneouscontact 1c		Time Restrict 2c Time Restrict 1c Instautaneous 1c
			N.O: 10 A 125 V a.c, 5 A 250 V a.c, 5 A 30 V d.c
			N.C: Three A 125 V a.c, 2 A 250 V a.c, 1A 30 V d.c
Setting error			Max. 5 % zero.05 sec
Repeat error			Max. zero.Three %
Temperature error			Max. 2 %
Insulation resistance			Min. 100 MΩ (Base on 500 V d.c)
Dielectric power			2000 V a.c 50/60 Hz for 1 min.
Impulse voltage			2000 V Max.
Vibration	Mechanical sturdiness		10-55Hz double amplitude0.75mm
	Malfunction sturdiness		10-55Hz double amplitude0.5mm
Shock	Mechanical sturdiness		300 Approx. 30G)
	Malfunction sturdiness		100 Approx. 10G)
Life expectancy	Mechanical		Over 10 million operations (Open & Quick frequency : 180/min)
	Electrical		Over 100,000 (250V a.c 3A load resistance)
Terminal sort			Socket sort 11 Pin		Socket sort eight Pin
Operation ambient temperature			-10 ~ 55 No condensation)
Conservation temperature			-20 ~ 65 No condensation)
Operation ambient humidity			35 ~ 85 %RH
Weight			About 100g (Together with fixing bracket)

Panel cutout

Connections

Dimensions

MA4N-A : 2 relay work as Timelimit.

MA4N-B : The relay linked , work as Instantaneous and othrealys work astime restrict.

Time vary

Please confer with Timing charts for working of relays

Two relays in Mode A1 and D1 work as Time restrict.

The relays in Mode B1, C1, E1, F1 linked work as Instantaneous. And different realys work as time restrict.

MA4N-C : In response to timing charts,

(unit : mm)relays works as Time restrict or Instantaneous.

Please consult with Timing charts for working of relays.

Timing charts (MA4N-A, MA4N-B)

MA4N-A: OUTPUT – TIME LIMIT 2c MA4N-B: OUTPUT – Instantaneous 1C, Time restrict 1c

A MODE: ON DELAY

B MODE: FLICKER OFF START

C MODE: INTERVAL

D MODE: Sign ON / OFF delay

E MODE: Sign OFF delay

F MODE: FLICKER ON Begin

Timing charts (MA4N-C)

t: Setting time, t-a: Inside setting time, Rt: Resetting time